Instructions:

Touch the touch panel screen to wake it up, allow for a few moments while the system turns on:

Once the system is initialized, select the input you want to use.  For systems with the cable TV access, the system defaults to “Cable TV” when turned on:

Channels can be changed using the “Cable TV Controls” up and down arrows.  The display volume can be adjusted using the “Source Volume” buttons:

Note: In some instances, there can be a lag between the time you hit the channel buttons, or volume control, and the time the display responds to the commands.  If there is a lag, please be patient, as continuously pressing the buttons will cause further lag.

To use the Nintendo Switch, select the “Nintendo Switch” option:

Note: Make sure that the Nintendo Switch is in the docking station; you may have to see game room attendant to get the Switch and put it in the dock.  If the Switch is not in the docking station, you may see a portrait screen on the display, the portrait screen displays when there is no signal going to the HDMI port that the Switch is plugged into, once the Switch is in the docking station, it will display on the screen.

To use the HDMI wall plate, connect a HDMI cable to your device, and plug it into the HDMI wall plate that is located below the display:

Note: DO NOT REMOVE ANY CABLES or PLUG ANYTHING INTO THE BACK OF THE DISPLAY, if you want to connect a device to the display, ONLY use the HDMI wall plate below the display

Select “HDMI” from the home screen:

To shut down the system, press the “System Off” button:

Touch the Help button on the Extron Panel if you need tech support